Growcast+
The platform's control unit. It takes the sensors and devices on its ports, drives up to three electrical outputs and sends everything to the cloud over Wi‑Fi. Aluminium, acrylic and steel; 277 × 144 × 147 mm; 2 kg.
- 3 outputs
- Sensors
- Devices
- Wi‑Fi
SENSORES and DISPOSITIVOS ports
Two RJ45 ports on the front take the Growcast sensors and devices: temperature, humidity, CO₂, soil moisture, conductivity, pH, pressure, equipment status.
- SENSORES
- DISPOSITIVOS
- RJ45
Wi‑Fi antenna
The external antenna links the unit to the Growcast platform over Wi‑Fi. Readings and equipment states reach the cloud continuously, and from there you see them in real time, receive alerts and review the history.
- Wi‑Fi
- External antenna
- NUBE
Three outputs
SALIDA 1, 2 and 3 on the back: 3-pin or Schuko sockets, up to 10 A in total. When the installation allows it, Growcast drives the connected equipment automatically or remotely.
- SALIDA 1 · 2 · 3
- 10 A
- 3-pin or Schuko
Four indicators
ON, ESTADO, NUBE and ERROR: four LEDs on the front show at a glance whether the unit is powered, running, connected to the cloud or in error.
- ON
- ESTADO
- NUBE
- ERROR
Expandable
Growcast + grows with the installation: over its RJ45 ports it takes extenders and modules, sensor and control, in whatever number is needed.
- Extender
- Sensor modules
- Control modules
Spec sheet
Control unit with three built-in outputs, ports for sensors and devices, and a connection to the platform.
- Dimensions
- L 277 mm × W 144 mm × H 147 mm
- Net weight
- 2 kg
- Materials
- Aluminium, acrylic, steel
- Power supply
- 100–240 VAC · 50/60 Hz
- Current draw with no devices connected
- 0.2 A
- Maximum total current
- 10 A
- Protection
- Ceramic fuses
- Connectivity
- Wi‑Fi
- Expansion ports
- RJ45
- Power outlets
- 3-pin or Schuko
Sensor modules
One body for every variable: what changes is what each module measures. They are installed at the relevant points of the operation.
- CO₂
- Temperature
- Humidity
- Soil moisture
- Pressure
- Conductivity (EC)
- pH
They connect to Growcast + over RJ45 and the information is sent continuously to the platform.
- Current conditions
- Historical charts
- Trends
The system alerts when a variable reaches a defined condition or when a relevant deviation is detected.
- Early alerts
- Relevant deviations
- Compare sectors
Control modules
Each control module adds outputs to the system: three sockets for electrical equipment, one LED per output and its ENTRADA port over RJ45.
- SALIDA 1 · 2 · 3
- LED S1 · S2 · S3
- ENTRADA RJ45
When the installation allows it, Growcast drives the connected equipment automatically or remotely from your device.
- By readings
- By schedule
- By interval
The state of each piece of equipment is recorded alongside the readings, to review what happened and compare periods.
- Equipment state
- History
- Compare periods
From the module to the plant.
The modules connect to Growcast + over RJ45, and Growcast + sends everything to the platform over Wi‑Fi. The same technical base serves a single room or an industrial installation.
Industrial installations
Where there is a plant, a store or a dairy, the unit and its modules go into an electrical board, and the board drives the site's equipment.
In plants, grain storage and dairy farms, Growcast is implemented as sensors, electrical boards and platform. When the infrastructure allows it, it drives aerators, pumps, solenoid valves and other electrical equipment of the installation, automatically or remotely.
- Grain storage and silos
- Dairy farms and dairy industry
- Cheese and cured meats
- Irrigation
Let's talk about your operation.
Is there an important process that today is handled by eye, without data? Every implementation starts by understanding the operation.